Research papers
This section contains a selection of abstracts of papers published by RD&T employees.
Further information about the subject matter presented in the papers can be obtained from the conference organisers, the publishers quoted or through your nearest university library.
Application of a Criterion for Cold Cracking to Casting High Strength Aluminium Alloys
07 Aug 2010
Mehdi Lalpoor, D.G. Eskin; Materials Innovation Institute, Delft, The Netherlands Hallvard G. Fjaer; Institute for Energy Technology, Norway Andreas ten Cate, Nick Ontijt; Corus RD&T, IJmuiden, The Netherlands Laurens Katgerman; Delft University of Technology, The Netherlands
Modification of the failure assessment for non-sharp defects
22 Jul 2010
A. Horn; Corus Swinden Technology Centre, United Kingdom A.H. Sherry; University of Manchester, United Kingdom
Simple approaches for solidification and diffusive homogenisation
20 Jul 2010
A. Howe; Corus IJmuiden, The Netherlands
The origin of the {h11}<1/h,1,2> fiber in single phase ferrite steels
09 Jul 2010
J. Moerman, C. Barbatti; Corus IJmuiden, The Netherlands P. Gobernado; Materials Innovation Institute, M2i & Delft University of Technology, The Netherlands R. H. Petrov; Ghent University, Belgium L.A.I. Kestens; Ghent University, Belgium & Delft University of Technology, The Netherlands
Highlights of collaboration between Industry and academia in the area of aluminium metallurgy
25 Jun 2010
Menno van der Winden, Cheng Liu, Démian Ruvalcabe-Jiminez, Lin Zhuang; Corus IJmuiden, The Netherlands
The effect of Sc additions on Al-Mg alloys for aerospace applications
25 Jun 2010
A. Kamp, A.F. Norman; Corus IJmuiden, The Netherlands S. Spangel; Aleris Aluminium Koblenz, Germany
Polymer modelling in wall ironing simulations of a PET-steel laminate
17 Jun 2010
H. Mulder; Corus IJmuiden
Multiscale friction modelling for sheet metal forming
15 Jun 2010
J. Hol; M2i, The Netherlands M.V. Cid Alfaro; Corus IJmuiden, The Netherlands M.B. de Rooij, T. Meinders; University of Twente, The Netherlands
Hot ductility of steels and its relationship to the problem of transverse cracking in the continuous casting of steels
31 May 2010
B. Mintz; City University London D.N. Crowther; Corus Swinden Technology Centre
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold Rolling
06 May 2010
P.H. Bolt, S. Mul, K.M. Reuver; Corus IJmuiden C. Gaspard, C. Vergne, D. Batazzi, T. Nylen; Akers Group (Sweden & Belgium)
Electron Backscatter Diffraction: a bridge between microstructure and quantitative analysis on material science
28 Apr 2010
Patricia Romano Triguero; Tata Steel Europe, IJmuiden
PARC software: a novel approach to quantative interpretation of spectral imaging datasets in terms of phase composition and distribution
26 Apr 2010
Corrie J.G. van Hoek, Sieger van der Laan; Corus RD&T IJmuiden Michiel de Roo; 2SEE Technology Woerden Grishja van der Veer; Geolytix Westerbork
Scale-up in microstructure and texture development in Advanced High Strength Steels
01 Apr 2010
Carla Barbatti; Corus RD&T IJmuiden
MagiZinc - Tribologische Vorteile im Presswerk
03 Mar 2010
Chiel Dane, Louisa Carless, Margot Vlot, Matthijs Toose; Corus RD&T IJmuiden
Weld strength of laser welded advanced high strength steels
04 Feb 2010
E. van der Aa, I. de Wit, S. Smith, T. van der Veldt; Corus RD&T
The effect of deliberate aluminium additions on the microstructure of rolled steel plate characterized using EBSD
01 Feb 2010
Y. Palizdar, R.C. Cochrane, R. Brydson, A.J. Scott; Institute of Materials Research, SPEME, Leeds, UK D. Crowther; Corus RD&T Swinden Technology Centre D. San Martin; MATERALIA Group, CENIM-CSIC, Spain
Optimisation of the Long-term Service Performance of Durehete 1055 Bolting Steel
31 Dec 2009
M. Perry; Corus Speciality Steels, UK P.F. Morris, P.D. Clarke; Corus RD&T Swinden Technology Centre
Aleris presentation about aluminium alloys
08 Dec 2009
C. Liu, A. Norman, L. Zhuang, J. Chen, D. Ruvalcaba Jimenez; Corus RD&T
Testing Methods for Fracture Modelling - The need for Harmonisation
04 Dec 2009
C.H.L.J. ten Horn; Corus Technology, IJmuiden, The Netherlands M.P.J. Lambriks; Corus Strip Products IJmuiden, The Netherlands K. Unruh; Faurecia Autositze GmbH, Stadthagen, Germany
Experimental analysis of strain path dependent ductile damage mechanics and forming limits
01 Nov 2009
CHLJ ten Horn; Corus RD&T IJmuiden CC Tasan; Materials Innovation Institute (M2i) JPM Hoefnagels, MGD Geers; Eindhoven University of Technology
My Order
